Contact Us
Site Map
About Us
Swimming Pools
Magiline Pools
Easy build
Easy maintenance
Custom made
Your Future Swimming Pool
Spa Hot Tub
Pool Covers
Additional Pool Systems
Swimming Pool Accessories
Swimming Pool Chemicals
Spa Hot Tub Chemicals
Swimming Pool Products
Swimming Pools Showcase
Construction Showcase
Spa Products
Downloads Corner

Be demanding for your peace of mind by choosing a pool that is installed neatly and quickly!

Your Magiline pool is pre-assembled and standardised, building it takes only 6 to 8 days!

Because of minimal earth work, that can be reduced to only 15 cm more than the dimensions of the pool, and the integral plant room, your garden is totally protected and you can build your terrace without waiting!

The Magiline concept, if necessary, allows you to change or replace the liner without risk of the copings cracking. This is because they are among the only copings on the market that sit on the 25 cm thick structure!

Project: Earthworks
The packaging of the kit facilitates delivery and storage on the site. Because the structure is free-standing (no struts or reinforcements), the excavation extends only 15cm beyond the pool.
Project: Installation of the structure

Installation of the structure and connection
The design of the structure and of the system by which the modular panels are assembled makes installation simple and rapid. The technical parts, the corners and the steps are pre-assembled and protected in the factory. The adjustment screws on the legs of each panel allow fine adjustment of the height and level.

Project: Pouring of concrete
When the positioning of the structure (levels and square) has been checked and adjusted, the welded wire netting placed on the bottom, and the reinforcement ties inserted in the holes provided for this purpose, C25/30 concrete is poured into the structure.
Project: Finishing
The swimming pool's copings sit entirely on the wall of the structure without risk of subsidence. They are made to measure and do not require unsightly cutting. After cleaning, the floor is covered with felt and the walls and steps with a thick foam.
Project: Filling with water
Finally, the liner, made to measure in the factory, is attached to the liner lock built into the structure.
print this page email this page go to the top of the page
©2013 Riviera Magi Pools | Disclaimer | Warranty Design & Development by BDigital | Powered by WebStudio